|
|
|
National Stock Number:
5310-00-911-9446
Federal Supply Class:
5310
National Item Identification Number:
009119446
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-33-28C4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.576 INCHES MINIMUM AND 0.606 INCHES MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.506 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 240000 POUNDS PER SQUARE INCH | | RECESS DEPTH | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | RECESS DIAMETER | 0.576 INCHES MINIMUM AND 0.606 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.576 INCHES MINIMUM AND 0.606 INCHES MAXIMUM |
|
|