|
|
|
National Stock Number:
5310-00-910-9104
Federal Supply Class:
5310
National Item Identification Number:
009109104
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 26-370-4743 | 72429 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 2.375 INCHES NOMINAL | | FLANGE THICKNESS | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6371 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6381 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OVERALL | | NOMINAL THREAD SIZE | 1.500 INCHES | | NUT DIAMETER | 1.746 INCHES MINIMUM AND 1.748 INCHES MAXIMUM | | NUT LENGTH | 2.000 INCHES NOMINAL | | NUT STYLE | SLEEVE | | NUT THICKNESS | 2.500 INCHES NOMINAL | | SPECIAL FEATURES | 12 HOLES IN FLANGE EQUALLY SPACED0.315 IN. MIN AND 0.320 IN. MAX DIA AND 0.360 IN. MIN AND 0.400 IN. MAX DEEP,ALSO,6HOLES IN FLANGE EQUALLY SPACED 0.070 IN. DIA AND 0.156 IN. DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 12 |
|
|