|
|
|
National Stock Number:
5310-00-905-9866
Federal Supply Class:
5310
National Item Identification Number:
009059866
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 1504-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | 1784307-2 | 56232 | LOCKHEED MARTIN CORPORATION | | E6415-22 | 1XP56 | AI-TEK INSTRUMENTS LLC | | E6415-22 | 77569 | NORTH AMERICAN PHILIPS CORP | | E6415-22 | 82227 | VDO CONTROL SYSTEMS INC | | 24-00176-002 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS35336-55 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | DEPARTURE FROM CITED DESIGNATOR | AS MOD BY MATERIAL | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.213 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750,COMP A,TEMPER HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY OVERALL | | STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH |
|