|
|
|
National Stock Number:
5310-00-905-8434
Federal Supply Class:
5310
National Item Identification Number:
009058434
Description:
NUT,SELF-LOCKING,HEXAGON
Detail:
A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.
|
Manufacturer Information:
| 5310009058434 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310009058434 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 610FT-1032 | 56878 | SPS TECHNOLOGIES, LLC | | 67FT-1032 | 56878 | SPS TECHNOLOGIES, LLC | | MS21083B3 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21083B3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | Y92NTM-02 | 019L2 | ESNA, LLC | | Y92NTM1032 | 27687 | GREER STOP NUT INC. | | Y92NTM-02 | 72962 | HARVARD INDUSTRIES INC | | NASM25027 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1022B3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | COPPER ALLOY NUT | | NUT STYLE | HEXAGON | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | BEARING SURFACE TYPE | CHAMFERED OR | | WASHER FACED | | THREAD SERIES | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL EXCEPT INSERT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL EXCEPT INSERT | | NUT HEIGHT | 0.188 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.367 INCHES MINIMUM AND | | 0.376 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT | | LUBRICATION | SOLUBLE LUBRICANT | | TEMP RATING | 250.0 DEG FAHRENHEIT MAXIMUM | | BEARING SURFACE FINISH | 125.0 MICROINCHES |
|
|