5310-00-903-1508 WASHER,FLAT Index 5310-00-903-1510 WASHER,FLAT

National Stock Number:
5310-00-903-1509

Federal Supply Class:
5310

National Item Identification Number:
009031509

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10121809A486GNIMIKKEISTOKESKUS NCB FINLAND
310-0740-32013499ROCKWELL COLLINS, INC.
5310009031509A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
418154-56D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
502-1515-002D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
5310009031509SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
NAS620C52P027ELKAY FASTENERS INC.
566A00492434228L3 TECHNOLOGIES, INC.
9336C2008-887557LOCKHEED CORP LOCKHEED ELECTRONICS CO INC
9336C2008-987557LOCKHEED CORP LOCKHEED ELECTRONICS CO INC
5310PL07381989009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL19359589009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
9336C2008-894117BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
9336C2008-994117BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
NAS620C578286SIKORSKY AIRCRAFT CORPORATION
NAS620C580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.128 INCHES NOMINAL
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.238 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.032 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us