|
|
|
National Stock Number:
5310-00-902-1121
Federal Supply Class:
5310
National Item Identification Number:
009021121
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1942283 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1942283 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1942283 | 24617 | GENERAL MOTORS CORP | | 1942283 | 85446 | BOKERS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.750 INCHES MINIMUM AND | | 0.770 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.710 INCHES MINIMUM AND | | 1.730 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.117 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 85446 | | DESIGN CONTROL REFERENCE | 1942283 |
|
|