|
|
|
National Stock Number:
5310-00-900-0633
Federal Supply Class:
5310
National Item Identification Number:
009000633
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 112072-28 | 59364 | HONEYWELL INTERNATIONAL INC. | | 112072-28 | 70210 | HONEYWELL INTERNATIONAL INC. | | 112072-28 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 112072-28 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.230 INCHES NOMINAL | | OVERALL DIAMETER | 0.470 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3251 ASSN STD 1ST MATERIAL RESPONSE AND AMS 3251 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | CORK AND RUBBER SYNTHETIC OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.020 INCHES NOMINAL |
|
|