|
|
|
National Stock Number:
5310-00-897-3258
Federal Supply Class:
5310
National Item Identification Number:
008973258
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| K674504-13 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.562 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | NUT DIAMETER | 2.250 INCHES NOMINAL | | NUT THICKNESS | 0.470 INCHES NOMINAL | | DRIVE POINT DIAMETER | 0.089 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 6 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 6 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.164 INCHES | | HOLE THREAD QUANTITY PER INCH | 32 | | COUNTERBORE DIAMETER | 1.563 INCHES MINIMUM AND | | 1.593 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | 4 NOTCHES,EACH 0.250 IN.WIDE,EQUALLY SPACED ON THE OUTSIDE DIAMETER |
|
|