|
|
|
National Stock Number:
5310-00-895-6490
Federal Supply Class:
5310
National Item Identification Number:
008956490
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 8205506 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 0.344 INCHES | | THREAD QUANTITY PER INCH | 36 | | THREAD PITCH DIAMETERS | 0.3257 TO 0.3303 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | COPPER ALLOY 360 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.050 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | NUT DIAMETER | 0.500 INCHES NOMINAL | | NUT THICKNESS | 0.438 INCHES NOMINAL | | DRIVE POINT WIDTH | 0.064 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.086 INCHES | | HOLE THREAD QUANTITY PER INCH | 56 | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | ADDITIONAL SLOT BEGINNING 0.085 FROM SLOTTED END DIMENSIONS OF 0.040 WIDE,0.465 MINIMUM/ 0.470 MAX DEEP FROM OUTSIDE EDGE CIRCUMFERENCING ITEM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19200 | | DESIGN CONTROL REFERENCE | 8205506 |
|
|