|
|
|
National Stock Number:
5310-00-894-0665
Federal Supply Class:
5310
National Item Identification Number:
008940665
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 206-11 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 206-11 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| MATERIAL | CORK OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | HH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.875 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.266 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.047 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 175000 POUNDS PER SQUARE INCH |
|
|