|
|
|
National Stock Number:
5310-00-881-1000
Federal Supply Class:
5310
National Item Identification Number:
008811000
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 530349-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.000 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 1.600 INCHES NOMINAL | | FLANGE THICKNESS | 0.140 INCHES NOMINAL | | NUT DIAMETER | 0.175 INCHES NOMINAL | | NUT LENGTH | 0.312 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 3 DRILLED | | DRILLED HOLE DIAMETER | 0.127 INCHES NOMINAL | | COUNTERSINK ANGLE | 120.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | TEST DATA DOCUMENT | 81349-MIL-T-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 70210 | | DESIGN CONTROL REFERENCE | 530349-1 |
|
|