|
|
|
National Stock Number:
5310-00-881-0861
Federal Supply Class:
5310
National Item Identification Number:
008810861
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10-5289-11 | 59501 | UNISON INDUSTRIES LLC | | 10-5289-11 | 77820 | AMPHENOL CORP | | 10-5289-12 | 0PYA5 | CONTINENTAL AEROSPACE TECHNOLOGIES, INC. | | 10-5289-12 | 59501 | UNISON INDUSTRIES LLC | | 10-5289-12 | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.593 INCHES MINIMUM AND 0.596 INCHES MAXIMUM | | OVERALL DIAMETER | 0.808 INCHES MINIMUM AND 0.816 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 6,T-HARD,FSCM 77820 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.026 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
|
|