6105-00-877-5361 MOTOR,ALTERNATING CURRENT Index 5310-00-877-5365 NUT,PLAIN,PLATE

National Stock Number:
5310-00-877-5364

Federal Supply Class:
5310

National Item Identification Number:
008775364

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
68376699167HAMILTON SUNDSTRAND CORPORATION


Techincal Specification:
MATERIALSTEEL CORROSION RESISTING OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.240 INCHES MINIMUM AND
0.260 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEDEE
WIDTH0.156 INCHES NOMINAL
OVERALL DIAMETER0.438 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.032 INCHES NOMINAL
THE MANUFACTURERS DATA
MANUFACTURERS CODE99167
DESIGN CONTROL REFERENCE683766


Click here to Register for Free 30-day Trial