|
|
|
National Stock Number:
5310-00-849-8632
Federal Supply Class:
5310
National Item Identification Number:
008498632
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 576757 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 576757 | 77445 | RTX CORPORATION | | 576757 | JA269 | TOKYO JUDOI KOGYO K.K. | | 576757 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5544 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.275 INCHES MINIMUM AND | | 0.285 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.045 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11449 | | DESIGN CONTROL REFERENCE | 576757 |
|
|