|
|
|
National Stock Number:
5310-00-809-8540
Federal Supply Class:
5310
National Item Identification Number:
008098540
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 01002919 | 27401 | CATERPILLAR PAVING PRODUCTS INC | | 25E-29 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 701718A | 64104 | DRESSER, LLC | | 35-00 | 92967 | HUTCHENS INDUSTRIES INC | | 5310-00-809-8540M | A01PJ | SE ZORIA-MASHPROEKT | | 5310008098540 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | LS1091391-25 | 01417 | GENERAL DYNAMICS LAND SYSTEMS INC. | | 82-1032-0088 | 04664 | PIERCE MANUFACTURING INC | | W221NAAW087NN039NNBA1 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | B35-00 | 92967 | HUTCHENS INDUSTRIES INC | | MS27183-25 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | XX002-0541 | H2229 | RDM TECHNOLOGY B.V. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY THE FINISH | | HOLE DIAMETER | 0.931 INCHES MINIMUM AND 0.968 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS | | OVERALL DIAMETER | 1.743 INCHES MINIMUM AND 1.780 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | | | THICKNESS | 0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
|
|