| PLATE WIDTH | 0.406 INCHES MINIMUM AND |
| 0.453 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM NUT |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND |
| 102.0 DEGREES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND |
| 0.349 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND |
| 0.690 INCHES MAXIMUM |
| TEMP RATING | 800.0 DEG FAHRENHEIT MAXIMUM |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | ALL SURFACES SILVER |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | IRON ALLOY 660 OVERALL |
| THREAD SERIES | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3B |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | SILVER OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| NUT LENGTH | 0.948 INCHES MAXIMUM |
| NUT HEIGHT | 0.281 INCHES MAXIMUM |
| PLATE THICKNESS | 0.047 INCHES MAXIMUM |