|
|
|
National Stock Number:
5310-00-766-3566
Federal Supply Class:
5310
National Item Identification Number:
007663566
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 949017-1290 | 0E5W9 | NIPPONDENSO OF LOS ANGELES INC | | 949017-1290 | SA352 | NIPPON DENSO CO. LTD | | S10-10-3365-1 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | EPOXY OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SS8656,BAKED TYPE 1,V593 FSCM 91342 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.396 INCHES MINIMUM AND | | 0.416 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.039 INCHES MINIMUM AND | | 0.059 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 78286 | | DESIGN CONTROL REFERENCE | S10-10-3365-1 |
|
|