5950-00-765-3195 TRANSFORMER,POWER AUTOTRANSFORME Index 5310-00-765-3205 WASHER,FLAT

National Stock Number:
5310-00-765-3197

Federal Supply Class:
5310

National Item Identification Number:
007653197

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
00-414653655AVOX SYSTEMS INC
0740723S3002GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
195-1010988CNH INDUSTRIAL AMERICA LLC
526-170744940CUMMINS POWER GENERATION INC.
5310007653197A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
10385718A486GNIMIKKEISTOKESKUS NCB FINLAND
82-1013-00404664PIERCE MANUFACTURING INC
820-4551187-680064NAVAL SHIP SYSTEMS COMMAND
FFW9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
5310PL07765809009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL13695939009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL13904849009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
70026-4195097LITTLE GIANT CRANE AND SHOVEL INC
5310007653197SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
MS27183-4196906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us