|
|
|
National Stock Number:
5310-00-764-3792
Federal Supply Class:
5310
National Item Identification Number:
007643792
Description:
NUT,SELF-LOCKING,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY.
|
Manufacturer Information:
| BACN10GR42 | 56878 | SPS TECHNOLOGIES, LLC | | BACN10GR42 | 77272 | THE BOEING COMPANY | | BACN10GR42 | 81205 | THE BOEING COMPANY | | BACN10GR42 | 97393 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 0.969 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD PITCH DIAMETERS | 0.9487 TO 0.9521 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | STEEL COMP 4130 NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE NUT | | SURFACE TREATMENT | OXIDE NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.063 INCHES NOMINAL | | NUT DIAMETER | 1.380 INCHES MINIMUM AND | | 1.400 INCHES MAXIMUM | | NUT THICKNESS | 0.265 INCHES MINIMUM AND | | 0.295 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.188 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL NUT | | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL | | SPECIAL FEATURES | THREADS SQUARE WITH BEARING SURFACE BY 0.002 IN. | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77272 | | DESIGN CONTROL REFERENCE | BACN10GR42 |
|
|