|
|
|
National Stock Number:
5310-00-764-0100
Federal Supply Class:
5310
National Item Identification Number:
007640100
Description:
NUT,SELF-LOCKING,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY.
|
Manufacturer Information:
| BACN10GR41 | 77272 | THE BOEING COMPANY | | BACN10GR41 | 81205 | THE BOEING COMPANY | | BACN10GR41L | 77272 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 2.250 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | STEEL COMP 4130 NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE NUT | | SURFACE TREATMENT | OXIDE NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.094 INCHES NOMINAL | | NUT DIAMETER | 2.829 INCHES MINIMUM AND | | 2.849 INCHES MAXIMUM | | NUT THICKNESS | 0.345 INCHES MINIMUM AND | | 0.375 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL NUT | | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL | | SPECIAL FEATURES | THREADS SQUARE WITH BEARING SURFACE BY 0.002 IN. | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77272 | | DESIGN CONTROL REFERENCE | BACN10GR41 |
|
|