|
|
|
National Stock Number:
5310-00-762-6104
Federal Supply Class:
5310
National Item Identification Number:
007626104
Description:
NUT,SELF-LOCKING,PLATE
Detail:
A nut with a flanged base of varied shapes which may be plain or mounted by rivets, bolts, welding or integral prongs. An integral feature is incorporated for locking on the threads of a mating member.
|
Manufacturer Information:
| 15600-82BC | 56878 | SPS TECHNOLOGIES, LLC | | 15600-82BC | 80539 | SPS TECHNOLOGIES, LLC | | F52LHTA58-82BC | 019L2 | ESNA, LLC | | F52LHTA58-82BC | 72962 | HARVARD INDUSTRIES INC | | MS21049L08K | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21049L08K | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RM52LHTA58-82BC | 019L2 | ESNA, LLC | | T2SH832BC | 11815 | SPS TECHNOLOGIES, LLC | | R2100A08K | 52828 | REPUBLIC FASTENER MFG. CORP. | | RM52LHTA58-82BC | 72962 | HARVARD INDUSTRIES INC |
|
Techincal Specification:
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN | | THREAD DIRECTION | RIGHT-HAND | | NUT STYLE | PLATE | | MATERIAL | STEEL OVERALL | | THREAD SERIES | UNJC | | NOMINAL THREAD SIZE | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM | | NUT LENGTH | 0.948 INCHES MAXIMUM | | NUT HEIGHT | 0.272 INCHES MAXIMUM | | PLATE THICKNESS | 0.047 INCHES MAXIMUM | | PLATE WIDTH | 0.360 INCHES MINIMUM AND | | 0.422 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM NUT | | LUBRICATION | DRY FILM LUBRICANT | | NUT MOUNTING PROVISION | COUNTERSUNK HOLES | | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND | | 102.0 DEGREES MAXIMUM | | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE | | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES | | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND | | 0.103 INCHES MAXIMUM | | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND | | 0.349 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND | | 0.690 INCHES MAXIMUM | | TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
|
|