|
|
|
National Stock Number:
5310-00-710-9477
Federal Supply Class:
5310
National Item Identification Number:
007109477
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 7109477 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR | | 66 FED STD 2ND MATERIAL RESPONSE OR | | 66 FED STD 3RD MATERIAL RESPONSE OR | | 66 FED STD 4TH MATERIAL RESPONSE OR | | 66 FED STD 5TH MATERIAL RESPONSE OR | | 66 FED STD 6TH MATERIAL RESPONSE OR | | 66 FED STD 7TH MATERIAL RESPONSE OR | | 66 FED STD 8TH MATERIAL RESPONSE OR | | QQ-S-698 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-S-698 FED SPEC 4TH MATERIAL RESPONSE OR | | QQ-S-698 FED SPEC 6TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.512 INCHES MINIMUM AND | | 0.517 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.547 INCHES MINIMUM AND | | 1.578 INCHES MAXIMUM | | OVERALL HEIGHT | 0.172 INCHES MINIMUM AND | | 0.203 INCHES MAXIMUM | | RECESS DEPTH | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM |
|
|