|
|
|
National Stock Number:
5310-00-664-6467
Federal Supply Class:
5310
National Item Identification Number:
006646467
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10163824 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 1983167-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | Q8C752-1 | 0WLU1 | GENERAL DYNAMICS CORP CONVAIR DIV LINDBERGH FIELD FACILITY | | Q8C752-1 | 14170 | HUGHES MISSILE SYSTEMS CO SAN DIEGO | | 1983167-1 | 55973 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER GUIDANCE SYSTEMS DIV | | FF-W-92B | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | Q8C752-1 | 63910 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I | | Q8C752-1 | 7B709 | TRACOR FLIGHT SYSTEMS INC SUB OF TRACOR INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.193 INCHES MINIMUM AND | | 0.218 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.620 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.016 INCHES NOMINAL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 37.0 ROCKWELL C MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-92B | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 7B709 | | DESIGN CONTROL REFERENCE | Q8C752-1 |
|
|