5310-00-655-9735, WASHER,FLAT

1620-00-655-9740 ARM ASSEMBLY,TORQUE,LANDING GEAR

National Stock Number:
5310-00-655-9735

Federal Supply Class:
5310

National Item Identification Number:
006559735

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

MS15795-912

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
DEPARTURE FROM CITED DESIGNATOR	AS MODIFIED BY THE SURFACE TREATMENT
HOLE DIAMETER	0.339 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
OVERALL DIAMETER	0.681 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	COPPER ALLOY 11 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND E CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	NICKEL OVERALL
THICKNESS	0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM

Click here to Register for Free 30-day Trial