|
|
|
National Stock Number:
5310-00-652-5674
Federal Supply Class:
5310
National Item Identification Number:
006525674
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 55160 | 82423 | KLEINSCHMIDT INC | | SMB187069 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 170 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | HOLE DIAMETER | 0.578 INCHES MINIMUM AND | | 0.583 INCHES MAXIMUM | | SHOULDER DIAMETER | 1.172 INCHES MINIMUM AND | | 1.203 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.266 INCHES MINIMUM AND | | 1.297 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.032 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.008 INCHES MINIMUM AND | | 0.012 INCHES MAXIMUM | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 82423 | | DESIGN CONTROL REFERENCE | 55160 |
|
|