5310-00-637-3215, WASHER,FLAT

National Stock Number:
5310-00-637-3215

Federal Supply Class:
5310

National Item Identification Number:
006373215

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

6735692	24617	GENERAL MOTORS CORP
6735692	63005	ROLLS-ROYCE CORPORATION
6735692	73342	ALLISON TRANSMISSION INC

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.394 INCHES MINIMUM AND 0.399 INCHES MAXIMUM
OVERALL DIAMETER	1.250 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 8735 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SURFACE FINISH	63.0 MICROINCHES ALL SURFACES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THICKNESS	0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM

Click here to Register for Free 30-day Trial