|
|
|
National Stock Number:
5310-00-616-8905
Federal Supply Class:
5310
National Item Identification Number:
006168905
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 6168905 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 1.812 INCHES | | THREAD QUANTITY PER INCH | 3 | | THREAD PITCH DIAMETERS | 1.7258 TO 1.7348 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1045 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 20.0 ROCKWELL C MINIMUM AND | | 27.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 2.900 INCHES MINIMUM AND | | 3.000 INCHES MAXIMUM | | FLANGE THICKNESS | 0.460 INCHES MINIMUM AND | | 0.470 INCHES MAXIMUM | | NUT DIAMETER | 2.350 INCHES MINIMUM AND | | 2.360 INCHES MAXIMUM | | NUT LENGTH | 0.710 INCHES NOMINAL | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | ROUND FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 6168905 |
|
|