5310-00-595-7203, WASHER,LOCK

National Stock Number:
5310-00-595-7203

Federal Supply Class:
5310

National Item Identification Number:
005957203

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

0-80X3/4 LG	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
1001171-4	07421	L3HARRIS INTERSTATE ELECTRONICS CORPORATION
6640201 ITEM 30	53711	NAVAL SEA SYSTEMS COMMAND
1001171-4	99564	AMETEK, INC.
5310005957203	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310005957203	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
7601909	19200	US ARMY ARDEC RDECOM
MS35338-117	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
ASME B18.21.1	81346	AMERICAN SOCIETY FOR TESTING AND MATERIALS
FF-W-84	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS35338-117	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

HARDNESS RATING	33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM
OUTSIDE DIAMETER	0.250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS	0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
MATERIAL	NICKEL ALLOY A OVERALL
MINIMUM TENSILE STRENGTH	155000 POUNDS PER SQUARE INCH
STYLE DESIGNATOR	SPLIT HELICAL-RIGHT HAND

Click here to Register for Free 30-day Trial