5310-00-584-7799, WASHER,FLAT

National Stock Number:
5310-00-584-7799

Federal Supply Class:
5310

National Item Identification Number:
005847799

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

122-5277660 UTEM 43	53711	NAVAL SEA SYSTEMS COMMAND
145-4510932-37	51563	ROHR, INC.
596-6391395 FIND 15	53711	NAVAL SEA SYSTEMS COMMAND
23-09144-004	64678	DAIMLER TRUCK NORTH AMERICA LLC
310-0175-000	79807	WROUGHT WASHER MFG., INC.
5310PL0994442	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
6391395	53711	NAVAL SEA SYSTEMS COMMAND
WSHR-S-014219	55316	LOCKHEED MARTIN CORPORATION
MS15795-822	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-822	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-822 13/ 16 DIA CRES	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
N400P18	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.805 INCHES MINIMUM AND
	0.842 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.462 INCHES MINIMUM AND
	1.499 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.108 INCHES MINIMUM AND
	0.160 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA	A TYPE AND
	1 GRADE AND
	B CLASS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-W-92

Click here to Register for Free 30-day Trial