|
|
|
National Stock Number:
5310-00-565-7042
Federal Supply Class:
5310
National Item Identification Number:
005657042
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 51-501-6 | 06714 | PF FISHPOLE HOISTS INC USE CAGE CODE 1YRX6 FOR CATALOGING. | | 51-501-6 | 1YRX6 | PF FISHPOLE HOISTS INC |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OR | | QQ-N-290,CLASS 1,GRADE C FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 0.431 INCHES MINIMUM AND | | 0.433 INCHES MAXIMUM | | FLANGE THICKNESS | 0.281 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | NUT DIAMETER | 0.308 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | NUT LENGTH | 0.156 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND NUT | | ROUND FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 06714 | | DESIGN CONTROL REFERENCE | 51-501-6 |
|
|