| LOCKING FEATURE | ANY ACCEPTABLE |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL CORROSION RESISTING NUT |
| RUBBER SYNTHETIC SEAL |
| STEEL CORROSION RESISTING SHELL |
| STEEL CORROSION RESISTING WASHER |
| THREAD SERIES | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3B |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CL 1,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| SURFACE TREATMENT | CADMIUM NUT |
| CADMIUM SHELL |
| CADMIUM WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM |
| NUT LENGTH | 0.989 INCHES MAXIMUM |
| NUT HEIGHT | 0.628 INCHES MAXIMUM |
| PLATE THICKNESS | 0.030 INCHES MAXIMUM |
| PLATE WIDTH | 0.552 INCHES MAXIMUM |
| LUBRICATION | DRY FILM LUBRICANT |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.093 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND |
| 0.349 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND |
| 0.690 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |