|
|
|
National Stock Number:
5310-00-527-4708
Federal Supply Class:
5310
National Item Identification Number:
005274708
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 5310PL0842018 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 6721454 | 24617 | GENERAL MOTORS CORP | | 6721454 | 63005 | ROLLS-ROYCE CORPORATION | | 6721454 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 0.469 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD PITCH DIAMETERS | 0.4487 TO 0.4513 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 8735 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6098 COND C MIL SPEC 1ST MATERIAL RESPONSE OR | | ASM 6324 ASSN STD 2ND MATERIAL RESPONSE OR | | MIL-S-6049 COND C MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | NUT DIAMETER | 0.860 INCHES MINIMUM AND | | 0.880 INCHES MAXIMUM | | NUT THICKNESS | 0.302 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 10 | | NUT COUNTERBORE DEPTH | 0.068 INCHES MINIMUM AND | | 0.088 INCHES MAXIMUM NUT | | COUNTERBORE DIAMETER | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 119.0 DEGREES MINIMUM AND | | 121.0 DEGREES MAXIMUM NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 63005 | | DESIGN CONTROL REFERENCE | 6721454 |
|
|