|
|
|
National Stock Number:
5310-00-523-2597
Federal Supply Class:
5310
National Item Identification Number:
005232597
Description:
NUT,PLAIN,BARREL
Detail:
A NUT OF CYLINDRICAL OR PARTLY CYLINDRICAL CROSS-SECTION WITH INTEGRAL THREADS PERPENDICULAR TO THE AXIAL CENTERLINE. ENDS MAY BE FLAT OR FLANGED. EXCLUDES NUT (1), PLAIN, ROUND.
|
Manufacturer Information:
| CV15-610503-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.125 INCHES | | THREAD QUANTITY PER INCH | 13 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | CVA1-585 COND C-1 FSCM 80378 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CVA5-2,FSCM 80378 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 43.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM | | NUT STYLE | PLAIN BARREL | | NUT DIAMETER | 1.870 INCHES MINIMUM AND | | 1.872 INCHES MAXIMUM | | NUT LENGTH | 2.240 INCHES NOMINAL | | BARREL HEIGHT | 1.350 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF THREADED HOLE TO END OF NUT | 1.120 INCHES NOMINAL | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | HOLE DRILLED IN FLAT SURFACE 0.250 IN. DIA BY 0.100 IN. DEEP | | TEST DATA DOCUMENT | 81349-MIL-I-6870 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | CV15-610503-1 |
|
|