5895-00-519-7543 COVER,ELECTRONIC COMMUNICATION E Index 5826-00-519-7558 INDICATOR,COURSE

National Stock Number:
5310-00-519-7554

Federal Supply Class:
5310

National Item Identification Number:
005197554

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
BACW10AW105AST81205THE BOEING COMPANY
BACW10AW105AST82918THE BOEING COMPANY
BACW10AW5AST82918THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.348 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
OVERALL DIAMETER0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 TEMPER T3 OR T4 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIFICATION/STANDARD DATA81205-BACW10AW MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us