5310-00-450-4107, WASHER,FLAT

National Stock Number:
5310-00-450-4107

Federal Supply Class:
5310

National Item Identification Number:
004504107

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10121391	A486G	NIMIKKEISTOKESKUS NCB FINLAND
NAS1401-7D3	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM
LENGTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/3 T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 T351 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
PERIPHERAL SHAPE STYLE	RECTANGULAR
WIDTH ACROSS FLATS	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE AND OXIDE FILM OVERALL
THICKNESS	0.090 INCHES NOMINAL

Click here to Register for Free 30-day Trial