| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL BASE |
| PLASTIC POLYAMIDE LOCKING INSERT |
| STEEL COMP 1212 NUT |
| STEEL SHELL |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3B |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM BASE |
| CADMIUM NUT |
| CADMIUM SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| NUT LENGTH | 1.063 INCHES MINIMUM AND |
| 1.093 INCHES MAXIMUM |
| NUT HEIGHT | 0.329 INCHES MINIMUM AND |
| 0.359 INCHES MAXIMUM |
| PLATE THICKNESS | 0.045 INCHES MINIMUM AND |
| 0.075 INCHES MAXIMUM |
| PLATE WIDTH | 0.500 INCHES NOMINAL |
| COUNTERSINK ANGLE | 95.0 DEGREES MINIMUM AND |
| 105.0 DEGREES MAXIMUM NUT |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND |
| 102.0 DEGREES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.329 INCHES MINIMUM AND |
| 0.359 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND |
| 0.314 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |