|
|
|
National Stock Number:
5310-00-420-5671
Federal Supply Class:
5310
National Item Identification Number:
004205671
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2642303 | 06848 | HONEYWELL INTERNATIONAL INC | | 2642303 | 2A659 | AIRMOTIVE CARBURETOR |
|
Techincal Specification:
| HOLE DIAMETER | 0.750 INCHES NOMINAL | | OVERALL DIAMETER | 1.030 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD 1ST MATERIAL RESPONSE OVERALL AND AMS 5516 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL OR STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
|
|