|
|
|
National Stock Number:
5310-00-415-7421
Federal Supply Class:
5310
National Item Identification Number:
004157421
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 3294041 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.050 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.1285 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.250 NOMINAL INCHES | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,TEMPER T73511 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-225/9,TEMPER T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 2.500 INCHES | | NUT DIAMETER | 2.937 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.356 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNJ |
|
|