|
|
|
National Stock Number:
5310-00-415-2084
Federal Supply Class:
5310
National Item Identification Number:
004152084
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4025461 | 6N299 | AGCO CORP PARTS OPN | | 4025461L | 6N299 | AGCO CORP PARTS OPN |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | OVERALL DIAMETER | 1.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ETD 150 FSCM 35168 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | THICKNESS | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
|
|