|
|
|
National Stock Number:
5310-00-404-8189
Federal Supply Class:
5310
National Item Identification Number:
004048189
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 111468H | 0SAT8 | KOMATSU AMERICA CORP. | | 111468H | 29510 | KOMATSU AMERICAN INTL CO | | 7409321 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 111468H | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 5310004048189 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310004048189 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | F7739 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | FC7739 | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV | | FC7739B | 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1213 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | COPPER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14550 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.984 INCHES MINIMUM AND | | 1.016 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.869 INCHES MINIMUM AND | | 1.873 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.225 INCHES MINIMUM AND | | 0.230 INCHES MAXIMUM |
|
|