5310-00-402-5797, WASHER,FLAT

National Stock Number:
5310-00-402-5797

Federal Supply Class:
5310

National Item Identification Number:
004025797

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

410950-110	96214	RAYTHEON COMPANY
FFW92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-809B	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-809B	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
COLOR	BLACK OVERALL
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
OVERALL DIAMETER	0.557 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-764 FED SPEC 2ND MATERIAL RESPONSE AND QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND B CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	OXIDE FILM OVERALL
THICKNESS	0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM

Click here to Register for Free 30-day Trial