|
|
|
National Stock Number:
5310-00-402-5712
Federal Supply Class:
5310
National Item Identification Number:
004025712
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 310-0132-000 | 05411 | DU PAGE MFG CO | | 310-0132-000 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CLASS 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.265 INCHES MINIMUM AND | | 0.297 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.013 INCHES MINIMUM AND | | 0.023 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05411 | | DESIGN CONTROL REFERENCE | 310-0132-000 |
|
|