|
|
|
National Stock Number:
5310-00-399-9080
Federal Supply Class:
5310
National Item Identification Number:
003999080
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 323553-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 323553PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE WIDTH ACROSS FLATS | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | FLANGE THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASE 73 ASSN STD 1ST MATERIAL RESPONSE OR MIL-B-994 COMP A MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 464 OR COPPER ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.099 INCHES | | NUT DIAMETER | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | SURFACE TREATMENT | NICKEL OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES | UNF |
|
|