5310-00-390-0610, WASHER,FLAT

National Stock Number:
5310-00-390-0610

Federal Supply Class:
5310

National Item Identification Number:
003900610

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

116132-1	82340	L3HARRIS TECHNOLOGIES, INC.
42018A	73760	ITT AEROSPACE CONTROLS LLC

Techincal Specification:

MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 303 OR
	STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR
	QQ-S-766 FED SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-766 FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-764 FED SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR
	QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR
	QQ-S-766 FED SPEC 4TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.450 INCHES MINIMUM AND
	0.460 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	0.620 INCHES MINIMUM AND
	0.630 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.028 INCHES MINIMUM AND
	0.032 INCHES MAXIMUM
THE MANUFACTURERS DATA
MANUFACTURERS CODE	73760
DESIGN CONTROL REFERENCE	42018A

Click here to Register for Free 30-day Trial