5330-00-297-6106 GASKET Index 5310-00-297-6108 WASHER,FLAT

National Stock Number:
5310-00-297-6107

Federal Supply Class:
5310

National Item Identification Number:
002976107

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
1038833844KLAUER MANUFACTURING COMPANY
201905415LINDE LIFT TRUCK CORP.
201912603CLARK EQUIPMENT CO
201923926KOMATSU AMERICA INTL CO
201936384FMC CORP LINK-BELT DIV
2019556A6LINDE MATERIAL HANDLING NORTH AMERICA CORP
P1273904285ATHEY PRODUCTS CORP
8B415911083CATERPILLAR INC
85162612603CLARK EQUIPMENT CO
5113933844KLAUER MANUFACTURING COMPANY
V1NC201940152VME AMERICAS INC SUB OF VME GROUP N V
85162689749CLARK MATERIAL HANDLING COMPANY
201989749CLARK MATERIAL HANDLING COMPANY
201999832SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC
V201912603CLARK EQUIPMENT CO
V201940152VME AMERICAS INC SUB OF VME GROUP N V
VINC201940152VME AMERICAS INC SUB OF VME GROUP N V
VINC201977237DANA OFF HIGHWAY PRODUCTS, LLC
V1NC201977237DANA OFF HIGHWAY PRODUCTS, LLC
V201977237DANA OFF HIGHWAY PRODUCTS, LLC
V201989749CLARK MATERIAL HANDLING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
HOLE DIAMETER0.698 INCHES MINIMUM AND 0.708 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-6183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCORK AND RUBBER SYNTHETIC OVERALL
OVERALL DIAMETER1.258 INCHES MINIMUM AND 1.268 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.278 INCHES MINIMUM AND 0.293 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us