5320-00-297-3327 PIN-RIVET Index 5320-00-297-3342 RIVET,SOLID

National Stock Number:
5310-00-297-3339

Federal Supply Class:
5310

National Item Identification Number:
002973339

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10121292A486GNIMIKKEISTOKESKUS NCB FINLAND
110400-2SS88818KEARFOTT CORPORATION
310-6320-00013499ROCKWELL COLLINS, INC.
525-2SS19315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
236-1018P13B150RAYTHEON COMPANY
236-1018P149956RAYTHEON COMPANY
9270102000019315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
W0-2SS19315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
525-2SS1NZ85EMCORE SPACE & NAVIGATION CORPORATION
525-2SS55972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
9270102000055972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
9270102000096774HONEYWELL INTERNATIONAL INC.
E20359C5810DRAEGER SAFETY AG & CO. KGAA
E20359D1379B/E AEROSPACE SYSTEMS GMBH
W0-2SS55972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
W0-2SS99251MISSION SYSTEMS DAVENPORT INC.


Techincal Specification:
MATERIALSTEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.087 INCHES MINIMUM AND
0.097 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.209 INCHES MINIMUM AND
0.229 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.013 INCHES MINIMUM AND
0.023 INCHES MAXIMUM
SPECIAL FEATURESNONMAGNETIC


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us