|
|
|
National Stock Number:
5310-00-290-1428
Federal Supply Class:
5310
National Item Identification Number:
002901428
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5308198 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 640018 | 34623 | AM GENERAL LLC | | T84J54 | 08018 | BORG-WARNER CORP | | T84J54B | 08018 | BORG-WARNER CORP | | GPW7052 | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 903421 | 58275 | SASCO INC CANADIAN DIV | | T84J54B | 79410 | LIBERTY VENTURES INTI LLC |
|
Techincal Specification:
| MATERIAL | CORK OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 86,GR 593,FSCM 79410 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.986 INCHES MINIMUM AND | | 0.996 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.625 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.188 INCHES NOMINAL |
|
|