|
|
|
National Stock Number:
5310-00-287-8354
Federal Supply Class:
5310
National Item Identification Number:
002878354
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 311566 | 62983 | EATON AEROSPACE, LLC | | 343507 | 62983 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | BLACK OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 4.660 INCHES NOMINAL | | INSIDE LEFT CORNER CHAMFER ANGLE | 60.0 DEGREES NOMINAL | | OVERALL DIAMETER | 9.555 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SPECIAL FEATURES | 0.250 IN. DIA LOCATIOR HOLE 0.250 IN. DEEP ON FACE 0.156 IN.FROM PERIPHERY | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | OXIDE FILM OVERALL | | THICKNESS | 0.625 INCHES NOMINAL |
|
|