|
|
|
National Stock Number:
5310-00-286-9654
Federal Supply Class:
5310
National Item Identification Number:
002869654
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 9902069-3 | 24446 | GENERAL ELECTRIC COMPANY | | 9902069-3 | 81893 | GENERAL ELECTRIC CO LYNN RIVER WORKS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.068 INCHES MINIMUM AND 1.088 INCHES MAXIMUM | | OVERALL DIAMETER | 1.807 INCHES MINIMUM AND 1.832 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | B8A3,FSCM 01289 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | WIDTH | 1.663 INCHES MINIMUM AND 1.716 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
|
|