|
|
|
National Stock Number:
5310-00-286-7976
Federal Supply Class:
5310
National Item Identification Number:
002867976
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 155602 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | 4A243500PC47 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | 70T17 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | A37104PC155602 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | D266499SH3PC36 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | OVERALL DIAMETER | 0.446 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | MATERIAL | LEATHER OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | WASHER TO ABSOLUTELY FREE FROM OIL,GREASE OR WAX AND ROUGH,TORN OR LINTY EDGES,WASHER TO BE SUITABLE FOR OXYGEN SERVICE TO 350PSI AND 130 DEG F |
|
|